BRUNO ELECTRA-RIDE III STAIRWAY ELEVATOR SYSTEM
Device Facts
| Record ID | K970927 |
|---|---|
| Device Name | BRUNO ELECTRA-RIDE III STAIRWAY ELEVATOR SYSTEM |
| Applicant | Bruno Independent Living Aids, Inc. |
| Product Code | ILK · Physical Medicine |
| Decision Date | Aug 26, 1997 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 890.5150 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Indications for Use
This Product will be used by the patient to assist themselves in navigating a specific set of stairs. This is a self-contained product that is mounted to the tread of a staircase. A trained dealer will install the unit, test it and teach the end user how to operate it. The typical user is someone who has limited function of their knees, hips or ankles and / or has trouble bending these joints. Other users include rehabilitated stroke victims, those inflicted with MS, arthritis, heart disease, and those who can not handle the exertion of walking up and down the stairs. The unit may be recommended by doctors or physical therapists, for those who are recuperating but a large number of users acquire a stairway elevator just because it eases the burden of climbing the stairs, improving their quality of life. For those who are wheelchair bound, it requires that they be able to transfer and is usually an option only if the physical limitations of the residence prohibits a vertical elevator.
Device Story
Stairway elevator system; self-contained unit mounted to staircase treads. Assists patients with limited mobility in navigating stairs. Installed and tested by trained dealers; end-user training provided. Operated by patient. Reduces physical exertion required for stair climbing; improves quality of life for individuals with joint limitations or chronic conditions. Alternative for wheelchair users when vertical elevators are not feasible.
Clinical Evidence
No clinical data.
Technological Characteristics
Electromechanical stairway elevator system; tread-mounted; self-contained unit.
Indications for Use
Indicated for patients with limited knee, hip, or ankle function/joint mobility, including those with arthritis, MS, heart disease, or stroke recovery, and individuals unable to exert themselves walking on stairs. Requires ability to transfer for wheelchair-bound users.
Regulatory Classification
Identification
Powered patient stairway chair lifts: A powered patient stairway chair lift is a motorized lift equipped with a seat and permanently mounted in one location that is intended for use in mitigating mobility impairment caused by injury or other disease by moving a person up and down a stairway. All other powered patient transport: A powered patient transport is a motorized device intended for use in mitigating mobility impairment caused by injury or other disease by moving a person from one location or level to another, such as up and down flights of stairs (e.g., attendant-operated portable stair-climbing chairs). This generic type of device does not include motorized three-wheeled vehicles or wheelchairs.
Special Controls
(i) Appropriate analysis and nonclinical testing (such as that outlined in the currently FDA-recognized edition of American Society of Mechanical Engineers (ASME) A18.1 “Safety Standard for Platform Lifts and Stairway Chair Lifts”) must demonstrate that the safety controls are adequate to prevent a free fall of the chair in the event of a device failure; (ii) Appropriate analysis and nonclinical testing must demonstrate the ability of the device, including armrests, to withstand the rated load with an appropriate factor of safety; (iii) Appropriate restraints must be provided to prevent the user from falling from the device (such as that outlined in the currently FDA-recognized edition of ASME A18.1 “Safety Standard for Platform Lifts and Stairway Chair Lifts”); (iv) Appropriate analysis and nonclinical testing (such as that outlined in the currently FDA-recognized editions of AAMI/ANSI/IEC 60601-1-2, “Medical Electrical Equipment—Part 1-2: General Requirements for Safety—Collateral Standard: Electromagnetic Compatibility—Requirements and Tests,” and ASME A18.1 “Safety Standard for Platform Lifts and Stairway Chair Lifts”) must validate electromagnetic compatibility and electrical safety; and (v) Appropriate analysis and nonclinical testing must demonstrate the resistance of the device upholstery to ignition.