← Product Code [QXM](/productcode/QXM) · K253651 # Revi System (K253651) _Bluewind Medical , Ltd. · QXM · Jul 28, 2026 · Gastroenterology, Urology · SESE_ **Canonical URL:** https://fda-staging.innolitics.com/device/K253651 ## Device Facts - **Applicant:** Bluewind Medical , Ltd. - **Product Code:** [QXM](/productcode/QXM.md) - **Decision Date:** Jul 28, 2026 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 876.5305 - **Device Class:** Class 2 - **Review Panel:** Gastroenterology, Urology - **Attributes:** Therapeutic ## Indications for Use The Revi System is indicated for the treatment of patients with symptoms of urgency incontinence alone or in combination with urinary urgency. ## Device Story Revi System is an implanted tibial electrical urinary continence device; treats urge urinary incontinence. System comprises an implantable neurostimulator, a non-implanted rechargeable wearable unit, a clinician programmer, and a HealthGo Micro Hub. The implant is placed near the tibial neurovascular bundle. The wearable unit wirelessly transmits power to the implant; the implant delivers electrical pulses to the tibial nerve. Stimulation travels along the leg to the sacral plexus and spinal cord, modulating nerve function to relieve symptoms. The clinician programmer interfaces with the wearable unit and cloud for data management. The device is intended for prescription use. Modifications in this submission include updated materials and an extended 15-year implant lifetime. ## Clinical Evidence No clinical data provided. Substantial equivalence is supported by bench testing, including electrical functionality, mechanical enclosure testing (impact, vibration, shock, axial forces, pinching), corrosion resistance, ultrasound compatibility, active aging testing for 15-year life, and biocompatibility evaluation per ISO 10993-1. ## Technological Characteristics Implantable neurostimulator constructed of Zirconia ceramic (BE grade). Operates via wireless power transfer from an external wearable unit. Provides electrical stimulation to the tibial nerve. System includes a clinician programmer and cloud-connected hub. Sterilized via ethylene oxide (ISO 11135). Labeled for 15-year implant life. ## Regulatory Identification An implanted tibial electrical urinary continence device is an implanted prescription device that receives power from a non-implanted external power source to provide electrical stimulation of the tibial nerve in proximity to the ankle. The device is intended for the treatment of overactive bladder related symptoms of urge urinary incontinence, urinary urgency, urinary frequency and nocturia. ## Special Controls In combination with the general controls of the FD&C Act, an implanted tibial electrical urinary continence device is subject to the following special controls: ## Predicate Devices - Revi System ([K240037](/device/K240037.md)) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0} FDA U.S. FOOD & DRUG ADMINISTRATION July 28, 2026 Bluewind Medical, Ltd. % Elissa Burg CEO / Regulatory Consultant Biovision, Ltd. Perach Halilach 183 Had-Nes, 1259000 Israel Re: K253651 Trade/Device Name: Revi System Regulation Number: 21 CFR§ 876.5305 Regulation Name: Implanted Tibial Electrical Urinary Continence Device Regulatory Class: II Product Code: QXM Dated: July 1, 2026 Received: July 1, 2026 Dear Elissa Burg: We have reviewed your section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (the Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database available at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. U.S. Food & Drug Administration 10903 New Hampshire Avenue Silver Spring, MD 20993 www.fda.gov {1} K253651 - Elissa Burg Page 2 Additional information about changes that may require a new premarket notification are provided in the FDA guidance documents entitled "Deciding When to Submit a 510(k) for a Change to an Existing Device" (https://www.fda.gov/media/99812/download) and "Deciding When to Submit a 510(k) for a Software Change to an Existing Device" (https://www.fda.gov/media/99785/download). Your device is also subject to, among other requirements, the Quality Management System Regulation (QMSR) (21 CFR Part 820), which includes, but is not limited to, ISO 13485 clause 7.3 (Design controls), ISO 13485 clause 8.3 (Nonconforming product), ISO 13485 clause 8.5.2 (Corrective action), and ISO 13485 clause 8.5.3 (Preventative action). Please note that regardless of whether a change requires premarket review, the QMSR requires device manufacturers to review and approve changes to device design and production (ISO 13485 clause 7.3 and ISO 13485 clause 7.5) and document changes and approvals in the Medical Device File (ISO 13485 clause 4.2.3). Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR Part 803) for devices or postmarketing safety reporting (21 CFR Part 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reporting-combination-products); good manufacturing practice requirements as set forth in the Quality Management System Regulation (QMSR) (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR Part 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR Parts 1000-1050. All medical devices, including Class I and unclassified devices and combination product device constituent parts are required to be in compliance with the final Unique Device Identification System rule ("UDI Rule"). The UDI Rule requires, among other things, that a device bear a unique device identifier (UDI) on its label and package (21 CFR 801.20(a)) unless an exception or alternative applies (21 CFR 801.20(b)) and that the dates on the device label be formatted in accordance with 21 CFR 801.18. The UDI Rule (21 CFR 830.300(a) and 830.320(b)) also requires that certain information be submitted to the Global Unique Device Identification Database (GUDID) (21 CFR Part 830 Subpart E). For additional information on these requirements, please see the UDI System webpage at https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/unique-device-identification-system-udi-system. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-devices/medical-device-safety/medical-device-reporting-mdr-how-report-medical-device-problems. {2} K253651 - Elissa Burg Page 3 For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100). Sincerely, ANDREW M. FALES -S for Jessica K. Nguyen, Ph.D. Assistant Director DHT3B: Division of Reproductive, Gynecology and Urology Devices OHT3: Office of GastroRenal, ObGyn, General Hospital and Urology Devices Office of Product Evaluation and Quality Center for Devices and Radiological Health Enclosure {3} DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration # **Indications for Use** Form Approved: OMB No. 0910-0120 Expiration Date: 06/30/2023 See PRA Statement below. 510(k) Number (if known) K253651 Device Name Revi System Indications for Use (Describe) The Revi System is indicated for the treatment of patients with symptoms of urgency incontinence alone or in combination with urinary urgency. Type of Use (Select one or both, as applicable) ☑ Prescription Use (Part 21 CFR 801 Subpart D) ☐ Over-The-Counter Use (21 CFR 801 Subpart C) **CONTINUE ON A SEPARATE PAGE IF NEEDED.** This section applies only to requirements of the Paperwork Reduction Act of 1995. **\*DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.\*** The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to: Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff@fda.hhs.gov *"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."* FORM FDA 3881 (6/20) Page 1 of 1 PSC Publishing Services (301) 443-6740 EF {4} BlueWind MEDICAL K253651 Page 1 of 4 # 510(k) Summary I. Submitter Information Company: BlueWind Medical Ltd. 6 Maskit Street Herzliya, 4614002 Israel Contact: Elissa Burg Regulatory Consultant BioVision Ltd. Had Nes 183 Israel 1295000 Tel. (972) 526633572 Email: elissa@biovision.co.il Date Prepared: July 23, 2026 II. Device name Proprietary Trade Name: Revi System Common Name: Implantable tibial electrical urinary continence device Regulation Name: Implanted tibial electrical urinary continence device (21 CFR 876.5305) Classification: Class II Panel: Gastroenterology/Urology Product Code: QXM III. Predicate Device: Revi System (K240037) IV. Indications for Use The Revi System is indicated for the treatment of patients with symptoms of urgency incontinence alone or in combination with urinary urgency. V. Product Description: The Revi System is an implanted tibial electrical urinary continence device that wirelessly receives power from a non-implanted external wearable unit to provide electrical stimulation of the tibial nerve in proximity to the ankle. The device is intended for the treatment of urge urinary incontinence, alone or in combination with urinary urgency. The implantable device is implanted in the vicinity of the tibial neurovascular bundle. The treatment effect of the system is achieved by the implantable wireless neurostimulation component, which sends pulses to the tibial nerve when energized by the wearable unit transmitted power. The electrical pulses stimulate the nerve along the leg, reaching the sacral plexus and entering the spinal cord. This stimulation has the power to modulate nerve function, relieving symptoms. This 510(k) describes modifications to certain materials and manufacturing processes of the Traditional 510(k) submission – Revi System – BlueWind Medical Ltd. Page 1 of 4 {5} BlueWind MEDICAL K253651 Page 2 of 4 Revi Implant as well as Implant lifetime extension to 15 years. # VI. Comparison of Technological Characteristics with Predicate | Description | Subject Device Revi System (K253651) | Predicate Device Revi System (K240037) | | --- | --- | --- | | Indications for Use | The Revi System is indicated for the treatment of patients with symptoms of urgency incontinence alone or in combination with urinary urgency. | The Revi System is indicated for the treatment of patients with symptoms of urgency incontinence alone or in combination with urinary urgency. | | System Components | • Implant – neurostimulator • Rechargeable Wearable Unit – non-implanted, rechargeable, powers the Implant to provide electrical stimulation • Clinician Programmer (CP) – proprietary application that interfaces with the Wearable Unit and Cloud • HealthGo Micro Hub – communicates with the Wearable Unit to acquire data and transmit to the Cloud | • Implant – neurostimulator • Rechargeable Wearable Unit – non-implanted, rechargeable, powers the Implant to provide electrical stimulation • Clinician Programmer (CP) – proprietary application that interfaces with the Wearable Unit and Cloud • HealthGo Micro Hub – communicates with the Wearable Unit to acquire data and transmit to the Cloud | | Principles of Operation | Implanted device receives power from non- implanted external Wearable Unit providing electrical stimulation to tibial nerve in proximity to ankle. | Implanted device receives power from non- implanted external Wearable Unit providing electrical stimulation to tibial nerve in proximity to ankle. | | Energy Source | Wearable Unit powered by internal rechargeable battery. | Wearable Unit powered by internal rechargeable battery. | | Intended Population | Adult Users | Adult Users | | Use Environment | Rx only | Rx only | | Main Implant Materials | Zirconia ceramic (BE grade) | Zirconia ceramic (B Grade) | | Implant Labeled Lifetime | 15 years | 10 years | As evidenced by the above table, both the subject and the predicate devices have similar intended use, but the subject and predicate devices have different technological characteristics. Several performance testing was conducted on the subject device, and it was established that the differences in technological characteristics between the subject and the predicate does not raise different questions of safety or effectiveness. # VII. Performance Testing Below is a list of the tests that were performed and successfully completed for the subject Traditional 510(k) submission – Revi System – BlueWind Medical Ltd. Page 2 of 4 {6} BlueWind MEDICAL K253651 Page 3 of 4 device per the following guidance and standards. - Sterilization validation according to ISO 11135: Second edition 2014-07-15 - Sterilization of health-care products – Ethylene oxide – Requirements for the development, validation and routine control of a sterilization process for medical devices and FDA’s Guidance: Submission and Review of Sterility Information in Premarket Notification (510(k)) Submissions for Devices Labeled as Sterile: Guidance for Industry and Food and Drug Administration Staff (February 2024). - EO residual testing according to ISO 10993-7: Second edition 2008-10-15 - Biological evaluation of medical devices – Part 7: Ethylene oxide sterilization residuals - Bacterial endotoxin testing according to ISO 11737-3: First Edition 2023-06 - Sterilization of health care products – Microbiological methods – Part 3: Bacterial endotoxin testing - Bioburden estimation according to ISO 11737-1: Third edition 2018-01 [Including AMD1:2021] - Sterilization of health care products – Microbiological methods – Part 1: Determination of a population of microorganisms on product - Biocompatibility evaluation according to ISO 10993-1: Fifth edition 2018-08 - Biological evaluation of medical devices – Part 1: Evaluation and testing within a risk management process, and FDA Guidance: Use of International Standard ISO 10993-1, "Biological evaluation of medical devices – Part 1: Evaluation and testing within a risk management process" (September 8, 2023) - Accelerated aging was performed according to ASTM F1980-21- Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices. - Packaging integrity testing was performed according to ASTM F1886/F1886M-16 - Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection, ASTM F88/F88M-23 - Standard Test Method for Seal Strength of Flexible Barrier Materials, and ASTM F1929-15 - Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration. Additionally, performance bench data was submitted for device performance and durability of the subject device. This data included: - Electrical Functionality Testing - Mechanical Enclosure Testing (Impact, Vibration, Shock, Axial Forces, and Pinching) - Dimensional Validation Testing - Corrosion Resistance Testing - Ultrasound Compatibility Testing - Active Aging Testing to Support 15-Year Implant Use-Life - Particulate Matter Testing Traditional 510(k) submission – Revi System – BlueWind Medical Ltd. Page 3 of 4 {7} BlueWind MEDICAL K253651 Page 4 of 4 - ○ Pushout Force Testing - ○ Implant Overheating Testing - ○ Atmospheric Pressure Testing - ○ Operation Under Extreme Body Temperatures Testing All pre-determined acceptance criteria were met. ### **VIII. Conclusion** Based on the information presented in this submission, it can be concluded that the subject device is substantially equivalent to the predicate. Traditional 510(k) submission – Revi System – BlueWind Medical Ltd. Page 4 of 4 --- **Source:** [https://fda-staging.innolitics.com/device/K253651](https://fda-staging.innolitics.com/device/K253651) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com