Nanovis Intervertebral Body Fusion System and FortiCore®

{0}------------------------------------------------ Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo features the department's name in a circular arrangement around a symbol. The symbol is a stylized representation of three human profiles facing right, layered on top of each other. The profiles are white against a dark background. Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002 June 28, 2016 Nanovis LLC % Karen Warden, Ph.D. President BackRoads Consulting Incorporated P.O. Box 566 Chesterland, Ohio 44026-2141 Re: K160874 Trade/Device Name: Nanovis Intervertebral Body Fusion System and FortiCore® Regulation Number: 21 CFR 888.3080 Regulation Name: Intervertebral body fusion device Regulatory Class: Class II Product Code: MAX Dated: May 31, 2016 Received: June 2, 2016 Dear Dr. Warden: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug. and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Parts 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set {1}------------------------------------------------ forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm. Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Sincerely yours, # Mark N. Melkerson -S Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration ### Indications for Use Form Approved: OMB No. 0910-0120 Expiration Date: January 31, 2017 See PRA Statement on last page. #### 510(k) Number (if known) K160874 K160874 Page 1 of 1 #### Device Name Nanovis Intervertebral Body Fusion System and FortiCore® #### Indications for Use (Describe) When used as a cervical intervertebral body fusion device, the Nanovis Intervertebral Body Fusion System and FortiCore® are intended for spinal fusion procedures in skeletally mature patients with disc disease (defined as neck pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies) at one spinal level from C2-T1. These patients should have had at least six weeks of non-operative treatment. The Nanovis Intervertebral Body Fusion System and FortiCore® implants are to be used with autogenous bone graft and in combination with supplemental fixation indicated for cervical fusion procedures. When used as a lumbar intervertebral body fusion device, the Nanovis Intervertebral Body Fusion System and FortiCore® are intended for spinal fusion procedures in skeletally mature patients with disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies) at one or two contiguous spinal levels from L2-S1. These patients should have had six months of nonoperative treatment. These patients may have had a previous non-fusion spinal surgery and or may have up to Grade 1 spondylolisthesis at the involved spinal level(s). The Nanovis Intervertebral Body Fusion System and FortiCore® implants are to be used with autogenous bone graft and in combination with supplemental fixation indicated for lumbar spinal fusion procedures. Type of Use (Select one or both, as applicable) 区 Prescription Use (Part 21 CFR 801 Subpart D) ] Over-The-Counter Use (21 CFR 801 Subpart C) #### PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON A SEPARATE PAGE IF NEEDED. #### FOR FDA USE ONLY Concurrence of Center for Devices and Radiological Health (CDRH) (Signature) {3}------------------------------------------------ ## 510(k) Summary | Date: | 28 March 2016 | |-----------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Sponsor: | Nanovis Spine, LLC | | | 5865 East State Rd. 14 | | | Columbia City, Indiana 46725 USA | | | (877) 907-6266 | | Sponsor Contact: | Matthew Hedrick, CEO & Chief Operating Officer | | 510(k) Contact: | Karen E. Warden, PhD | | | BackRoads Consulting | | | PO Box 566 | | | Chesterland, OH 44026 | | | Office: 440.729.8457 | | Trade Names: | Nanovis Intervertebral Body Fusion System and FortiCore® | | Common Name: | Interbody fusion device | | Device Classification | Class II | | Classification Name: | Intervertebral body fusion device | | Regulation: | 888.3080 | | Device Product Code: | MAX | | Submission Purpose: | To add a TLIF interbody size to the Nanovis Intervertebral Body Fusion PEEK<br>and FortiCore® Systems, to dimensionally modify the Nanovis Intervertebral<br>Body Fusion System tantalum marker and to add a FortiCore® TLIF marker. | | Device Description: | The Nanovis Intervertebral Body Fusion System and FortiCore® consist of<br>implants and related instruments for implantation. The upper and lower<br>aspects of the implants from both systems are open and have a central<br>column to be packed with autogenous bone graft. The FortiCore® implants<br>have an integrated titanium scaffold which assists in securing the implant in<br>the intervertebral space. The devices from both systems are available in a<br>variety of shapes and sizes to accommodate the individual patient anatomy. | | Indications for Use: | When used as a cervical intervertebral body fusion device, the Nanovis<br>Intervertebral Body Fusion System and FortiCore® are intended for spinal<br>fusion procedures in skeletally mature patients with degenerative disc<br>disease (defined as neck pain of discogenic origin with degeneration of the<br>disc confirmed by history and radiographic studies) at one spinal level from<br>C2-T1. These patients should have had at least six weeks of non-operative<br>treatment. The Nanovis Intervertebral Body Fusion System and FortiCore®<br>implants are to be used with autogenous bone graft and in combination with<br>supplemental fixation indicated for cervical fusion procedures.<br>When used as a lumbar intervertebral body fusion device, the Nanovis<br>Intervertebral Body Fusion System and FortiCore® are intended for spinal<br>fusion procedures in skeletally mature patients with degenerative disc<br>disease (defined as discogenic back pain with degeneration of the disc<br>confirmed by history and radiographic studies) at one or two contiguous<br>spinal levels from L2-S1. These patients should have had six months of<br>nonoperative treatment. These patients may have had a previous non-fusion<br>spinal surgery and/or may have up to Grade 1 spondylolisthesis or<br>retrolisthesis at the involved spinal level(s). The Nanovis Intervertebral Body<br>Fusion System and FortiCore® implants are to be used with autogenous<br>bone graft and in combination with supplemental fixation indicated for lumbar<br>spinal fusion procedures. | | Materials: | The Nanovis Intervertebral Body Fusion System implants are available in<br>polyetheretherketone (PEEK- OPTIMA® LT1, Invibio® as described by ASTM<br>F2026) and titanium alloy (Ti-6Al-4V ELI as described by ASTM F136). The<br>PEEK devices incorporate a tantalum marker per ASTM F560.<br>FortiCore® devices are manufactured from polyetheretherketone (PEEK-<br>OPTIMA® LT1, Invibio®) as described by ASTM F2026. The integrated<br>scaffold (BioSync-Ti, Sites Medical) is manufactured from CP titanium as<br>described by ASTM F67. The FortiCore® devices also incorporate a tantalum<br>marker per ASTM F560. | | Primary Predicate: | Nanovis Intervertebral Body Fusion System (Nanovis LLC, K110442) | | Additional Predicate: | FortiCore® (Nanovis LLC, K140280) | | | Eminent Spine Interbody Fusion System (Eminent Spine, K090064) | | Performance Data: | Finite element and dimensional analyses of the modified Nanovis<br>Intervertebral Body Fusion and FortiCore® devices were performed. The<br>results demonstrated the performance of the modified Nanovis Intervertebral<br>Body Fusion System and modified FortiCore devices are substantially<br>equivalent to the predicate devices.<br>In addition, the Bacterial Endotoxins Test (BET) was performed according to<br>ANSI/AAMI ST72 and the device results met the acceptance criterion. | | Technological<br>Characteristics: | The modified Nanovis Intervertebral Body Fusion System and FortiCore®<br>possess technological characteristics similar to the predicate devices. These<br>include:<br>performance (as described above), basic design (hollow structural frame), implant grade materials (PEEK polymer, tantalum and/or titanium), and sizes (widths, lengths and heights are within the range(s) offered by the predicates). Therefore the fundamental scientific technology of the Nanovis Intervertebral<br>Body Fusion System and FortiCore devices is similar to previously cleared<br>devices. | | Conclusion: | The Nanovis Intervertebral Body Fusion System and FortiCore® possess the<br>same intended use and similar technological characteristics as the predicate<br>devices. Therefore the Nanovis Intervertebral Body Fusion System and<br>FortiCore® are substantially equivalent to legally marketed predicates. | {4}------------------------------------------------