K113855 · Imix Adr Finland OY · KPR · Jan 25, 2012 · Radiology
Device Facts
Record ID
K113855
Device Name
PANORAD, PANORAD SL
Applicant
Imix Adr Finland OY
Product Code
KPR · Radiology
Decision Date
Jan 25, 2012
Decision
SESE
Submission Type
Special
Regulation
21 CFR 892.1680
Device Class
Class 2
Indications for Use
PanoRad and PanoRad SL X-Ray Systems are indicated for use in generating radiographic images of human anatomy. They have Solid State X-ray Imaging systems intended to replace radiographic film/screen systems in all general-purpose diagnostic procedures. (Not for mammography.)
Device Story
PanoRad and PanoRad SL are stationary X-ray systems designed for general-purpose diagnostic imaging. The system utilizes an X-ray generator (CPI, Stadler, or EMD Technologies) and a solid-state digital X-ray detector (IMIX, DRTech FLAATZ, or Konica Minolta AERO DR) to capture radiographic images of human anatomy. The system is operated by healthcare professionals via a software-driven touch panel LCD. Image acquisition and processing are managed by Oehm und Rehbein dicomPACS software, which ensures DICOM 3 compliance. The system replaces traditional film/screen radiography, providing digital images for clinical review. By digitizing the imaging workflow, the device facilitates faster image acquisition, storage, and transmission, supporting clinical decision-making in diagnostic environments.
Clinical Evidence
No clinical data provided. Substantial equivalence is supported by bench testing and standards testing confirming the safety and effectiveness of the modified components compared to the predicate devices.
Technological Characteristics
Stationary X-ray system; includes X-ray generator (45-80 kW), solid-state digital X-ray detector panels (IMIX, DRTech, Konica Minolta), and touch panel LCD interface. DICOM 3 compliant. Software-driven image acquisition. Safety features include UL listing and Ralco R302L/A DHHS collimator.
Indications for Use
Indicated for generating radiographic images of human anatomy for general-purpose diagnostic procedures. Not for mammography.
Regulatory Classification
Identification
A stationary x-ray system is a permanently installed diagnostic system intended to generate and control x-rays for examination of various anatomical regions. This generic type of device may include signal analysis and display equipment, patient and equipment supports, component parts, and accessories.
Special Controls
*Classification.* Class II (special controls). A radiographic contrast tray or radiology diagnostic kit intended for use with a stationary x-ray system only is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 892.9.
{0}------------------------------------------------
ﻟﻠﻤﺨﺘﻠﻔﺔ
JAN 2 5 2012
## 510(k) Summary K113855
IMIX ADR Finland OY Peltokatu 16 D3 33100 Tampere, Finland Telephone: +358 (3) 2129 850 Fax: +358 (3) 2129 852 E-mail: emea@imixadr.com Contact: Peter Reinli President Date Prepared: November 11, 2011
- 1. Identification of the Device: Proprietary-Trade Name: PanoRad and PanoRad SL Systems Classification Name: Stationary X-ray system, Product Codes Product Codes KPR, MQB, and LLZ Common/Usual Name: General purpose diagnostic X-ray Units with Digital X-ray receptor panels.
- 2. Equivalent legally marketed devices: IMIX PanoRad (K101435); This modified system employs the DRTech FLAATZ 560 (K111583), OR the DRTech FLAATZ 750E (K080064) OR Konica Minolta AERO DR (K102349) AND K070618, DICOM Pacs made by O&R. .
- 3. Indications for Use (intended use) PanoRad and PanoRad SL X-Ray Systems are indicated for use in generating radiographic images of human anatomy. It has a Solid State X-ray Imaging system intended to replace radiographic film/screen systems in all general-purpose diagnostic procedures. Not for mammography.
- 4. Description of the Device: The modified device can produce digital x-ray images in various configurations.
| Product<br>Name | Mechanics | Generator | Detector | Workstation<br>Software |
|-----------------|-------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------|
| PanoRad | ShinYoung for M Co.<br>SU-1001 | CPI<br>CMP 200 or CMP<br>200DR<br>50 or 65 kW<br>-OR-<br>Stadler Elektronik<br>8x Series<br>50 or 65 kW<br>-OR-<br>EMD Technologies<br>EPS 45-80 Rad<br>FOR ALL MODELS | IMIX ADR OY<br>IMIX 2000 UNV3K or 4K<br>-OR-<br>DRTech FLAATZ 560<br>(K111583) or<br>FLAATZ 750E (K080064)<br>-OR-<br>AERO DR<br>(K102349 KONICA<br>MINOLTA) | Oehm und<br>Rehbein<br>dicomPACS<br>(K070618) An<br>Image Acquisition<br>workstation with<br>DICOM 3<br>compliance<br>FOR ALL<br>DETECTORS<br>(except Aero DR) |
| PanoRad<br>SL | ShinYoung for M Co.<br>SU-1001 or SU-3001 | | | |
Here is a product configuration matrix:
- 5. Safety and Effectiveness, comparison to predicate device. The results of bench, clinical, and standards testing indicates that the modified device is as safe and effective as the predicate devices. The changed components are in fact identical to the predicate devices.
{1}------------------------------------------------
## 6. Substantial Equivalence Chart, PanoRad and PanoRad SL Systems
| Characteristic | IMIX PanoRad and SomaRad X-Ray Systems, K101435 | PanoRad or PanoRad SL X-Ray Systems, Modified device |
|------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------|
| Intended Use: | Indicated for use in generating<br>radiographic images of human<br>anatomy. It has a Solid State X-ray<br>Imaging system intended to replace<br>radiographic film/screen systems in all<br>general-purpose diagnostic procedures.<br>Not for mammography | SAME |
| User Interface | Software Driven Touch Panel LCD | Software Driven Touch Panel LCD |
| Generator | CPI or Stadler | CPI, Stadler, or EMD Technologies |
| Maximum output | 50 and 65 kW | 45, 50, 65 or 80 kW |
| Stand | Supplied by Shinyoung For M Co Ltd | Supplied by Shinyoung For M Co Ltd |
| Image Acquisition | IMIX or Varian Digital Radiographic<br>Detectors | IMIX ADR OY<br>IMIX 2000 UNV3K or 4K<br>-OR-<br>DRTech FLAATZ 560 (K111583)<br>or FLAATZ 750E (K080064)<br>-OR-<br>AERO DR<br>(K102349) |
| Digital Panel Size | 14" x 17" (4336R)<br>17" x 17: (4343R)<br>16" x 16" | Added panels:<br>FLAATZ 750E 14 x 14<br>FLAATZ 560 14 x 17<br>AERO DR: 14 x 14 or 14 x 17 |
| Digital Panel Supplier | IMIX panels, same as in K073114 OR:<br>Varian 4343R or 4336R | IMIX panels, DRTech, or Konica<br>Minolta |
| Digital Resolution | 7.9 megapixel or 9.4 megapixel. 139 μ | FLAATZ 750E: 6.6 megapixel 168 μ<br>FLAATZ 560 7.9 megapixel 139 μ<br>AERO DR: 5 megapixel 175μ |
| DICOM | Yes, via O&R software cleared in<br>K091364 | Yes, via O&R software cleared in<br>K091364 |
| Method of Control | Touch Panel LCD | Touch Panel LCD |
| Collimator | Ralco R302L/A DHHS | Ralco R302L/A DHHS |
| Safety | UL listed | UL listed |
7. Conclusion: After analyzing bench, clinical, and standards testing data, it is the conclusion of IMIX ADR that the IMIX PanoRad and PanoRad SL X-Ray Systems are as safe and effective as the predicate devices, have few technological differences, and have no new indications for use, thus rendering them substantially equivalent to the predicate devices.
{2}------------------------------------------------
Image /page/2/Picture/0 description: The image shows the logo for the Department of Health & Human Services - USA. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is a stylized symbol resembling an eagle or bird in flight, composed of three curved lines.
## DEPARTMENT OF HEALTH & HUMAN SERVICES
Public Health Service
Food and Drug Administration 10903 New Hampshire Avenue Document Control Room - WO66-G609 Silver Spring, MD 20993-0002
IMIX ADR Finland OY % Mr. Daniel Kamm, P.E. Regulatory Engineer Kamm & Associates 8870 Ravello Court NAPLES FL 34114
JAN- 2 5-2012 .
Re: K113855
Trade/Device Name: PanoRad, PanoRad SL X-Ray Systems Regulation Number: 21 CFR 892.1680 Regulation Name: Stationary x-ray system Regulatory Class: II Product Code: KPR, MQB, LLZ Dated: December 20, 2011 Received: December 29, 2011
## Dear Mr. Kamm:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into class II (Special Controls), it may be subject to such additional controls. Existing major regulations affecting your device can be found in Title 21, Code of Federal Regulations (CFR), Parts 800 to 895. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Parts 801 and 809); medical device reporting (reporting of
{3}------------------------------------------------
medical device-related adverse events) (21 CFR 803); and good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820). This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Parts 801 and 809), please contact the Office of In Vitro Diagnostic Device Evaluation and Safety at (301) 796-5450. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.
Sincerely Yours,
Mary Pastel
Mary S. Pastel, Sc.D. Director Division of Radiological Devices Office of In Vitro Diagnostic Device Evaluation and Safety Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
Indications for Use 510(k) Number (if known):K11 30
Device Name: PanoRad, PanoRad SL X-Ray Systems
Indications For Use:
IMIX PanoRad and PanoRad SL X-Ray Systems are indicated for use in generating radiographic images of human anatomy. They have Solid State X-ray Imaging systems intended to replace radiographic film/screen systems in all general-purpose diagnostic procedures. (Not for mammography.)
Prescription Use X (Part 21 CFR 801 Subpart D) AND/OR
Over-The-Counter Use (21 CFR 807 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of In Vitro Diagnostic Devices (OIVD)
Page 1 of 1
Mary Spatel
Division of Radiological Devic Office of In Vit 510K
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.
Copy this now. It will not be shown again.
Connected apps
Apps you authorized through browser sign-in. Disconnecting revokes their access immediately.
Learn the FDA Browser
Two short videos show you everything — or skip straight to the written tutorial if you'd rather read. You can reopen this any time from the Tutorial button in the top bar.
Part 1 — Search, results, and everyday workflows 16 min
Part 2 — Embeddings: the galaxy map 3 min
1. Search: exact and fuzzy
Type a phrase like "coronary artery calcification" into the search box. You get two kinds of results. Exact results match the literal phrase — prefix searches work ("coronary artery calcificati") but suffix searches do not. Fuzzy results match on the meaning and intent of your phrase rather than the exact words, and are sorted by relevance score. Hover over the Exact or Fuzzy badge on any row to see exactly why it matched.
Use the checkboxes above the results to narrow: SaMD keeps only software-only devices, AI / ML keeps only devices with AI.
Exact vs. fuzzy search: what's the difference?
Exact matches on the literal phrase (prefix search works, suffix does not). Fuzzy matches on the meaning and intent of the phrase rather than the exact words. Hover over the badge on any row to see why it matched.
You search "coronary artery calcification" and want only software devices with AI. What two filters do you apply?
Narrow by SaMD (software-only devices), then narrow by AI/ML (devices with AI).
2. The results table
Scroll right in the results table. The intended use is extracted for you — no need to open the PDF. The device story gives a high-level snapshot of what the device does and how it's used. The AI Performance sub-table shows each output name, acceptance criteria, observed values, and development/test dataset descriptions — the same format Innolitics uses for regulatory strategy outputs, and the fastest high-level fingerprint of an AI device. It is AI-generated but has been very reliable in practice.
Where do you find a device's intended use without opening the PDF?
Scroll right in the search results table. The intended use column is extracted for you; no need to dig into the 510(k) summary PDF.
What does the AI Performance sub-table show, and why is it useful?
Output name, acceptance criteria, observed values, development dataset description, and test dataset description. It's the same format we use for regulatory strategy output and Fast 510(k) input, and the fastest high-level fingerprint of an AI device. AI-generated but reliable in practice.
3. Judging fuzzy relevance
Fuzzy results trail off in relevance as you scroll. Use three signals to decide how far down to go: the fuzzy badge explanations, the intended use column, and whether your target output (e.g., Cobb angle) still appears in the AI Performance sub-table. Once it stops appearing, you're past the relevant zone. A top hit with a low score (~0.4) and a stretched explanation is a hint the closest predicates are far away — the project may be headed for De Novo. Note the fuzzy search is a pattern match: it doesn't handle negation ("not") well, and hardware devices can appear — filter by SaMD/AI ML to cut them.
How do you judge how far down fuzzy search results to go?
Use the relevancy signals: the fuzzy badge explanations, the intended use column, and whether the target output (e.g., Cobb angle) still appears in the AI Performance sub-table. Once it stops appearing, results are trailing off in relevancy.
4. Device detail page: chat and citations
Click a device name to open its detail page: device facts on the left, a chat window on the right. Ask something like "Describe the training data". The answer carries little citation bubbles — click one to jump to the highlighted passage in the source PDF, so you can verify every AI answer against the document. There's also a Download PDF button for sharing.
How do you verify an AI chat answer on the device detail page?
Click the citation bubbles to jump to the relevant highlight in the source document.
Reading rule for every project: how many summaries do you read in full?
At least the three most relevant 510(k) or De Novo summaries, in full. After that, use targeted chat questions to confirm your memory quickly. The tool supports this professional habit — it doesn't replace it.
5. Side-by-side comparison
Select multiple rows in the results table (aim for under ~10), then open the PDF Viewer tab. Ask one question — it goes to all selected devices in parallel, each with citations. This is the fastest way to compare and contrast devices: training data, PCCP scope, how they handled adding new scanners, and so on.
What does the side-by-side PDF viewer mode do?
Select multiple devices, open the PDF viewer tab, and ask one question (e.g., "Describe the training data"). It queries all selected devices simultaneously with citations, so you can compare and contrast quickly.
6. Collections
With rows selected, go to the Collections tab and create a labeled collection (e.g., "Cobb Angle Project"). Reload that selection any time — before a client call, pull up the collection and ask questions across all of its devices at once.
How do you save a set of selected devices for later use?
Select the rows, go to the Collections tab, and create a labeled collection (e.g., "Cobb Angle Project"). You can reload the selection anytime and carry it into the PDF viewer and other tabs that support selections.
7. Product codes and the regulations tree
Click a product code in the results to jump to it in the regulations tree — identification text, sibling product codes, and devices you can open in a PDF viewer on the right. Click a regulation number to see its identification, special controls, and related product codes. You can also search by product code or regulation number at the top of the tree. Always read the special controls if any exist for your device — it broadens your search and sharpens pre-kickoff research.
What can you do from the regulations tree view?
Browse product codes and regulation numbers, read the identification text and special controls, browse sibling product codes, open device PDFs on the right, and search by product code or regulation number at the top of the tree.
8. Chart view
Click Show Chart and segment by regulation number (or product code) to see which regulations dominate your result set. Clicking a regulation takes you into the regulations tree. Great for spotting that most matches are, say, hardware laparoscopic devices — a cue to go back and filter.
How do you see which regulations dominate a search result set?
Click "Show Chart" and segment by Regulation Number. Clicking a regulation takes you to the regulations tree.
9. The predicate graph
Open the Predicates tab for a family-tree view of predicate relationships. Click a node to trace its parents and children; selections from search carry over pre-selected. Commonly predicated devices are worth reading — a lot of people predicated them for a reason. The visual lineage is also handy on client calls, e.g. to show how a predicate family evolved and justify why your predicate still holds.
In the predicate graph, why are commonly predicated devices worth reading?
A lot of people predicated them for a reason. Clicking a node traces parents and children, and selections from search carry over pre-selected.
10. Embeddings: the galaxy map
The Embeddings tab plots every matching document in a 2-D "galaxy map" where semantically similar devices cluster together. Hover or click clusters to explore, and let AI label the clusters for you. Embeddings beat product codes for grouping: two devices can carry different product codes (LLZ vs. QIH) yet do the same thing — the embedding captures the meaning of the intended use and device story. This is also exactly how retrieval-augmented generation (RAG) works under the hood, and it makes a great visual on client calls.
Try it yourself
Head to the search page and work through a few of these AI/ML fuzzy searches to build intuition: perivascular fat on CT · aortic valve calcification opportunistic screening on noncontrast CT · breast cancer prediction on digital pathology slides · autism detection · gestational age prediction · a hearing aid that can also detect a pulse · foundation model based analysis of ECG · large language models · penetration test. Watch how the relevance scores, intended use, and AI Performance tables tell you when results stop being meaningful.