IMMAGE SYSTEMS TOTAL IMMUNOGLOBULIN E (IGE) REAGENT IMMAGE IGE CALIBRATOR
K024210 · Beckman Coulter, Inc. · DGC · Feb 24, 2003 · Immunology
Device Facts
Record ID
K024210
Device Name
IMMAGE SYSTEMS TOTAL IMMUNOGLOBULIN E (IGE) REAGENT IMMAGE IGE CALIBRATOR
Applicant
Beckman Coulter, Inc.
Product Code
DGC · Immunology
Decision Date
Feb 24, 2003
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 866.5510
Device Class
Class 2
Attributes
Pediatric
Indications for Use
Total Immunoglobulin E (IGE) reagent, when used in conjunction with IMMAGE® Immunochemistry Systems and IGE Calibrator, is intended for the quantitative determination of total human immunoglobulin E (IgE) in serum or plasma by rate turbidimetry.
Device Story
The IMMAGE Immunochemistry System Total IgE reagent is an in vitro diagnostic assay for quantitative measurement of total human IgE in serum or plasma. The system utilizes rate turbidimetry, where mouse monoclonal antibodies react with IgE in the patient sample to form immune complexes; the rate of complex formation is measured optically. The device is intended for use in clinical laboratory settings by trained personnel. Results are used by clinicians to assist in the diagnosis and management of atopic conditions and to evaluate potential atopic tendencies in infants. The system provides a wider measuring range (up to 30,000 IU/mL with dilution) compared to the predicate, facilitating the assessment of elevated IgE levels associated with allergic diseases, parasitic infections, and other clinical conditions.
Clinical Evidence
Bench testing only. Performance demonstrated via method comparison against the Access Total IgE predicate (n=125, slope 1.06, intercept 2.75, r=0.991). Imprecision studies (n=80 per level) showed within-run CVs of 5.1-5.8% and total imprecision CVs of 6.3-7.3% across three concentration levels.
Indicated for quantitative determination of total human IgE in serum or plasma to aid in diagnosis and management of atopic diseases (asthma, hay fever, atopic dermatitis, urticaria) and to distinguish atopic from non-atopic individuals. Applicable to all ages, including infants (cord blood/infant levels predictive of future atopic tendencies).
Regulatory Classification
Identification
An immunoglobulins A, G, M, D, and E immunological test system is a device that consists of the reagents used to measure by immunochemical techniques the immunoglobulins A, G, M, D, an E (serum antibodies) in serum. Measurement of these immunoglobulins aids in the diagnosis of abnormal protein metabolism and the body's lack of ability to resist infectious agents.
{0}------------------------------------------------
1024210
FEB 24 2003
### 510(k) Summary IMMAGE® Immunochemistry System Total Immunoglobulin E Reagent (IGE) Reagent and Calibrator
#### 1.0 Submitted By:
Annette Hellie Requlatory Affairs Manager Beckman Coulter, Inc. 200 S. Kraemer Blvd., W-104 Brea, California 92822-8000 Telephone: (714) 993-8767 FAX: (714) 961-4123
#### 2.0 Date Submitted:
December 19, 2002
#### 3.0 Device Name(s):
#### 3.1 Proprietary Names
IMMAGE® Immunochemistry System Total Immunoglobulin E (IGE) Reagent IMMAGE® Immunochemistry System IGE Calibrator
#### 3.2 Classification Name
Immunoglobulins A, G, M, D, and E test system (21 CFR § 866.5510) Calibrator (21 CFR § 862.1150)
#### 4.0 Predicate Device:
| Candidate(s) | Predicate | Manufacturer | Docket<br>Number |
|----------------------------|-------------------|--------------------------|------------------|
| IMMAGE System<br>Total IGE | Access® Total IgE | Beckman<br>Coulter, Inc. | K930984 |
#### 5.0 Description:
Total Immunoglobulin E (IGE) reagent, when used in conjunction with IMMAGE® Immunochemistry Systems and IGE Calibrator, is intended for the quantitative determination of total human immunoglobulin E (IgE) in serum or plasma by rate turbidimetry.
{1}------------------------------------------------
#### 6.0 Intended Use:
Total Immunoglobulin E (IGE) reagent, when used in conjunction with IMMAGE® Immunochemistry Systems and IGE Calibrator, is intended for the quantitative determination of total human immunoglobulin E (IgE) in serum or plasma by rate turbidimetry ..
# Clinical Significance:
IgE is a member of the immunoglobulin family of proteins that was first described in the 1960's. IgE. like all immunodlobulins, is produced by plasma cells in response to antigenic stimuli. IgE is unique however in certain structural aspects and the role it plays in allergic diseases.
Measurement of total serum IgE is often used as a tool in the diagnosis and management of atopic diseases such as asthma, hay fever, atopic dermatitis and urticaria. It has been used to distinguish atopic from non-atopic individuals presenting allergy-like symptoms. In addition, studies have also shown that increased levels of IgE in cord blood and infants may be predictive of future atopic tendencies.
Normal levels of circulating IgE are extremely low in comparison to other immunoqlobulins. Levels of IgE at birth are almost undetectable but increase in non-allergic adults. Elevated levels are commonly seen in cases of allergic diseases, parasitic infections, pulmonary aspergillosis, Wiskott-Aldrich Syndrome, and myeloma.
Serum IqE levels may vary as a result of diet, genetic background, geographical location and other factors. It is therefore recommended that total IqE measurements be used in conjunction with other clinical tests when establishing diagnoses.
#### 7.0 Comparison to Predicate(s):
The following table shows similarities and differences between the predicates identified in Section 4.0 of this summary.
| | Similarities | |
|----------------------------|--------------------------------|-----------------------------------------------------------------------------------------------------------------|
| IMMAGE System<br>Total IGE | Intended Use | Same as Access Total IgE |
| | Liquid stable reagent | |
| | Antibody (mouse<br>monoclonal) | |
| | Differences | |
| IMMAGE System<br>Total IGE | Methodology | The IMMAGE uses rate nephelometry and<br>the Access uses chemiluminescent<br>immunoassay |
| | Measuring range | 0.25-3000 IU/mL for Access<br>5.0 - 500 IU/mL (initial dilution) up to<br>30,000 (extended dilution) for IMMAGE |
{2}------------------------------------------------
#### Summary of Performance Data: 8.0
The data in the Premarket Notification on safety and effectiveness supports a finding of substantial equivalence to chemistry test systems already in commercial distribution. Equivalence is demonstrated through method comparison, stability, linearity, and imprecision experiments.
| Analyte | Slope | Intercept | r | n | Predicate Method |
|---------------------|-------|-----------|-------|-----|------------------|
| IMMAGE<br>Total IGE | 1.06 | 2.75 | 0.991 | 125 | Access Total IgE |
Method Comparison Study Results
| Sample | Mean (mg/dL) | S.D. (mg/dL) | %C.V. | N |
|------------------------|--------------|--------------|-------|----|
| Within-Run Imprecision | | | | |
| Level 1 | 16.5 | 0.97 | 5.8 | 80 |
| Level 2 | 145 | 7.4 | 5.1 | 80 |
| Level 3 | 383 | 19.9 | 5.2 | 80 |
| Total Imprecision | | | | |
| Level 1 | 16.5 | 1.11 | 6.7 | 80 |
| Level 2 | 145 | 9.1 | 6.3 | 80 |
| Level 3 | 383 | 28.1 | 7.3 | 80 |
## IMMAGE System IGE Estimated Imprecision
This summary of safety and effectiveness is being submitted in accordance with the requirements of the Safe Medical Device Act of 1990 and the implementing regulation 21 CFR 807.92.
{3}------------------------------------------------
DEPARTMENT OF HEALTH & HUMAN SERVICES
Image /page/3/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo is a circular seal with the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is an abstract image of a human figure.
Ms. Annette Hellie Regulatory Affairs Manager Beckman Coulter, Inc. 200 S. Kraemer Boulevard, W-104 P.O. Box 8000 Brea, California 92822-8000
FEB 24 2003
Food and Drug Administration 2098 Gaither Road Rockville MD 20850
024210
Trade/Device Name: IM
Rea
Regulation Number: 21 C
Regulation Name: Immu
Regulatory Class: II
FEB 2 4 2003
Re: k024210
Trade/Device Name: IMMAGE® Immunochemistry System Total Immunoglobulin E Reagent (IGE) Reagent and Calibrator Regulation Number: 21 CFR § 866.5510 Regulation Name: Immunoglobulins A, G, M, D, and E Test System Regulatory Class: II Product Code: DGC Dated: February 11, 2003 Received: February 12, 2003
Dear Ms. Hellie:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug. and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in Title 21, Code of Federal Regulations (CFR), Parts 800 to 895. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Parts 801 and 809); and good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820). This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
{4}------------------------------------------------
Page 2 -
If you desire specific information about the application of labeling requirements to your device, or questions on the promotion and advertising of your device, please contact the Office of In Vitro Diagnostic Device Evaluation and Safety at (301) 594-3084. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html.
Sincerely yours,
Steven Butman
Steven I. Gutman, M.D., M.B.A. Director Office of In Vitro Diagnostic Device Evaluation and Safety Center for Devices and Radiological Health
Enclosure
{5}------------------------------------------------
page ___ of _/
510(k) Number (if known): K02 42 /O
### Device Name: IMMAGE® Immunochemistry System Total Immunoglobulin E Reagent (IGE) Reagent and Calibrator
Indications for Use:
Total Immunoglobulin E (IGE) reagent, when used in conjunction with IMMAGE® Immunochemistry Systems and IGE Calibrator, is intended for the quantitative determination of total human immunoglobulin E (IgE) in serum or plasma by rate turbidimetry.
# (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
| Prescription Use (per 21 CFR 801.109) | ✓ |
|---------------------------------------|---|
|---------------------------------------|---|
OR
| Over-the-Counter Use | |
|------------------------|--|
| Optional Format 1-2-96 | |
*J. P. Reave for J. Bautista*
(Division Sign-Off)
Division of Clinical Laboratory Devices
| 510(k) Number | 1C054210 |
|---------------|----------|
|---------------|----------|
Beckman Coulter, Inc., Section 510(k) Notification IMMAGE® Immunochemistry System Total Immunoglobulin E (IGE) IGE510K_Section1.doc, December 2002
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.
Copy this now. It will not be shown again.
Connected apps
Apps you authorized through browser sign-in. Disconnecting revokes their access immediately.
Learn the FDA Browser
Two short videos show you everything — or skip straight to the written tutorial if you'd rather read. You can reopen this any time from the Tutorial button in the top bar.
Part 1 — Search, results, and everyday workflows 16 min
Part 2 — Embeddings: the galaxy map 3 min
1. Search: exact and fuzzy
Type a phrase like "coronary artery calcification" into the search box. You get two kinds of results. Exact results match the literal phrase — prefix searches work ("coronary artery calcificati") but suffix searches do not. Fuzzy results match on the meaning and intent of your phrase rather than the exact words, and are sorted by relevance score. Hover over the Exact or Fuzzy badge on any row to see exactly why it matched.
Use the checkboxes above the results to narrow: SaMD keeps only software-only devices, AI / ML keeps only devices with AI.
Exact vs. fuzzy search: what's the difference?
Exact matches on the literal phrase (prefix search works, suffix does not). Fuzzy matches on the meaning and intent of the phrase rather than the exact words. Hover over the badge on any row to see why it matched.
You search "coronary artery calcification" and want only software devices with AI. What two filters do you apply?
Narrow by SaMD (software-only devices), then narrow by AI/ML (devices with AI).
2. The results table
Scroll right in the results table. The intended use is extracted for you — no need to open the PDF. The device story gives a high-level snapshot of what the device does and how it's used. The AI Performance sub-table shows each output name, acceptance criteria, observed values, and development/test dataset descriptions — the same format Innolitics uses for regulatory strategy outputs, and the fastest high-level fingerprint of an AI device. It is AI-generated but has been very reliable in practice.
Where do you find a device's intended use without opening the PDF?
Scroll right in the search results table. The intended use column is extracted for you; no need to dig into the 510(k) summary PDF.
What does the AI Performance sub-table show, and why is it useful?
Output name, acceptance criteria, observed values, development dataset description, and test dataset description. It's the same format we use for regulatory strategy output and Fast 510(k) input, and the fastest high-level fingerprint of an AI device. AI-generated but reliable in practice.
3. Judging fuzzy relevance
Fuzzy results trail off in relevance as you scroll. Use three signals to decide how far down to go: the fuzzy badge explanations, the intended use column, and whether your target output (e.g., Cobb angle) still appears in the AI Performance sub-table. Once it stops appearing, you're past the relevant zone. A top hit with a low score (~0.4) and a stretched explanation is a hint the closest predicates are far away — the project may be headed for De Novo. Note the fuzzy search is a pattern match: it doesn't handle negation ("not") well, and hardware devices can appear — filter by SaMD/AI ML to cut them.
How do you judge how far down fuzzy search results to go?
Use the relevancy signals: the fuzzy badge explanations, the intended use column, and whether the target output (e.g., Cobb angle) still appears in the AI Performance sub-table. Once it stops appearing, results are trailing off in relevancy.
4. Device detail page: chat and citations
Click a device name to open its detail page: device facts on the left, a chat window on the right. Ask something like "Describe the training data". The answer carries little citation bubbles — click one to jump to the highlighted passage in the source PDF, so you can verify every AI answer against the document. There's also a Download PDF button for sharing.
How do you verify an AI chat answer on the device detail page?
Click the citation bubbles to jump to the relevant highlight in the source document.
Reading rule for every project: how many summaries do you read in full?
At least the three most relevant 510(k) or De Novo summaries, in full. After that, use targeted chat questions to confirm your memory quickly. The tool supports this professional habit — it doesn't replace it.
5. Side-by-side comparison
Select multiple rows in the results table (aim for under ~10), then open the PDF Viewer tab. Ask one question — it goes to all selected devices in parallel, each with citations. This is the fastest way to compare and contrast devices: training data, PCCP scope, how they handled adding new scanners, and so on.
What does the side-by-side PDF viewer mode do?
Select multiple devices, open the PDF viewer tab, and ask one question (e.g., "Describe the training data"). It queries all selected devices simultaneously with citations, so you can compare and contrast quickly.
6. Collections
With rows selected, go to the Collections tab and create a labeled collection (e.g., "Cobb Angle Project"). Reload that selection any time — before a client call, pull up the collection and ask questions across all of its devices at once.
How do you save a set of selected devices for later use?
Select the rows, go to the Collections tab, and create a labeled collection (e.g., "Cobb Angle Project"). You can reload the selection anytime and carry it into the PDF viewer and other tabs that support selections.
7. Product codes and the regulations tree
Click a product code in the results to jump to it in the regulations tree — identification text, sibling product codes, and devices you can open in a PDF viewer on the right. Click a regulation number to see its identification, special controls, and related product codes. You can also search by product code or regulation number at the top of the tree. Always read the special controls if any exist for your device — it broadens your search and sharpens pre-kickoff research.
What can you do from the regulations tree view?
Browse product codes and regulation numbers, read the identification text and special controls, browse sibling product codes, open device PDFs on the right, and search by product code or regulation number at the top of the tree.
8. Chart view
Click Show Chart and segment by regulation number (or product code) to see which regulations dominate your result set. Clicking a regulation takes you into the regulations tree. Great for spotting that most matches are, say, hardware laparoscopic devices — a cue to go back and filter.
How do you see which regulations dominate a search result set?
Click "Show Chart" and segment by Regulation Number. Clicking a regulation takes you to the regulations tree.
9. The predicate graph
Open the Predicates tab for a family-tree view of predicate relationships. Click a node to trace its parents and children; selections from search carry over pre-selected. Commonly predicated devices are worth reading — a lot of people predicated them for a reason. The visual lineage is also handy on client calls, e.g. to show how a predicate family evolved and justify why your predicate still holds.
In the predicate graph, why are commonly predicated devices worth reading?
A lot of people predicated them for a reason. Clicking a node traces parents and children, and selections from search carry over pre-selected.
10. Embeddings: the galaxy map
The Embeddings tab plots every matching document in a 2-D "galaxy map" where semantically similar devices cluster together. Hover or click clusters to explore, and let AI label the clusters for you. Embeddings beat product codes for grouping: two devices can carry different product codes (LLZ vs. QIH) yet do the same thing — the embedding captures the meaning of the intended use and device story. This is also exactly how retrieval-augmented generation (RAG) works under the hood, and it makes a great visual on client calls.
Try it yourself
Head to the search page and work through a few of these AI/ML fuzzy searches to build intuition: perivascular fat on CT · aortic valve calcification opportunistic screening on noncontrast CT · breast cancer prediction on digital pathology slides · autism detection · gestational age prediction · a hearing aid that can also detect a pulse · foundation model based analysis of ECG · large language models · penetration test. Watch how the relevance scores, intended use, and AI Performance tables tell you when results stop being meaningful.