RE-USABLE STERILIZATION POUCH / BAG

K013715 · Quality Products of Montana · FRG · Apr 1, 2002 · General Hospital

Device Facts

Record IDK013715
Device NameRE-USABLE STERILIZATION POUCH / BAG
ApplicantQuality Products of Montana
Product CodeFRG · General Hospital
Decision DateApr 1, 2002
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 880.6850
Device ClassClass 2

Indications for Use

The device is a re-usable sterilization pouch designed to The device the sterilization process and allow a simple method of packaging devices to maintain sterility. Acceptable method of sterilization is moist heat sterilization where the temperature is below 137℃ (273°F). The pouch may be re-used up to 30 times in dental practices and approved for 90 days storage.

Device Story

Reusable sterilization pouch; used in dental practices to package instruments for moist heat sterilization; maintains sterility during storage. Pouch withstands temperatures below 137°C; supports up to 30 reuse cycles; 90-day shelf life. Operated by dental staff; provides simple packaging method for infection control.

Clinical Evidence

Bench testing only.

Technological Characteristics

Reusable sterilization pouch; material designed for moist heat sterilization; temperature limit <137°C; 30-cycle reuse limit; 90-day storage capability.

Indications for Use

Indicated for use in dental practices to package devices for moist heat sterilization (below 137°C) and maintain sterility during storage for up to 90 days. Reusable up to 30 times.

Regulatory Classification

Identification

A sterilization wrap (pack, sterilization wrapper, bag, or accessories, is a device intended to be used to enclose another medical device that is to be sterilized by a health care provider. It is intended to allow sterilization of the enclosed medical device and also to maintain sterility of the enclosed device until used.

Submission Summary (Full Text)

{0}------------------------------------------------ ## DEPARTMENT OF HEALTH & HUMAN SERVICES Image /page/0/Picture/1 description: The image is a black and white logo for the U.S. Department of Health & Human Services. The logo consists of a circular border with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES-USA" written around it. Inside the circle is a stylized image of three human profiles facing to the right, with wavy lines representing hair or flowing fabric. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 Mr. Larry Larson Quality Products of Montana 100 North Johnson, #7 Missoula. Montana 59801 ## APR 0 1 2002 Re: K013715 Trade/Device Name: Re-Useable Sterilization Pouch Regulation Number: 880.6850 Regulation Name: Sterilization Wrap Regulatory Class: II Product Code: KCT and FRG Dated: January 22, 2002 Received: January 25, 2002 Dear Mr. Larson: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA). it may be subject to such additional controls. Existing major regulations affecting vour device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition. FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. {1}------------------------------------------------ ## Page 2 - Mr. Larson You must comply with all the Act's requirements, including, but not limited to: registration r od listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4618 . Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html Sincerely yours, Timothy A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ | Labels | Values | |---------------------------|------------------------------| | 510(k) Number (if known): | K013715 | | Device Name: | Reusable Sterilization Pouch | Indications For Use: . ## INDICATIONS FOR USE Page The device is a re-usable sterilization pouch designed to The device the sterilization process and allow a simple method of packaging devices to maintain sterility. Acceptable method of sterilization is moist heat sterilization where the temperature is below 137℃ (273°F). The pouch may be re-used up to 30 times in dental practices and approved for 90 days storage. (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Prescription Use (Per 21 CFR 801.109) OR Over-The-Counter Use (Optional Format 1-2-96) Olin S. Lin (Division Sign-Off) Division of Dental, Infection Control, and General Hospital Devices 510(k) Number
Innolitics

Panel 1

/
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...